This bundle includes the i12-Natural Gas Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Vertical vent kit.

Eccotemp i12-NG

The Eccotemp i12-NG has a new revolutionary design, making it unlike any other tankless water heater on the market today. This model features a sleek black acrylic glass casing, fully automatic temperature controls for prescision, touch screen and LCD temperature display which shows output temperature as well as GPM flow. Rated at an impressive 4 GPM, the Eccotemp i12-NG Tankless Water Heater is a natural gas fired, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. The Eccotemp i12-NG is perfect for vacation cabins, cottages and smaller homes.

The i12-NG comes with a horizontal stainless steel vent kit, ready to install and with its 120 volt UL listed power cord powering the internal exhaust fan and digital display. It only pulls about 2 watts idol and 1.07 Amps during operation, making it an ideal energy efficient appliance.

The i12-NG offers a 35-40 degree F temperature rise when operating at flow rate of 4 gallons per minute and a 77 degree F temperature rise at 1.5 gallons per minute.

Eccotemp i12 Manual

Some additional Features

• True 1/2" NPT water fittings
• acrylic glass casing
• Child locking technology
• Fully automatic temperature controls
• Natural Gas Powered
• Sleek modern design
• 4 GPM flow capacity
• Field tested to 5500 ft. elevation (not recommended to be used any higher)
• Power ventilation for safety and efficiency
• Tested-Safe Electronic Ignition System
• 80,000 BTU
• LCD temperature display
• Weighs only 33 pounds
• Unit Dimensions are 15”x24”x4”
• Stainless vent kit included
• Uses gas only when hot water is on
• Requires standard household 120 volt electric outlet
• UL listed electrical components
• Two year warranty
• Hot water capacity range: 0.6 - 4.8 GPM
• Maximum / Minimum gas rate: 25,000 - 80,000 BTUs

2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with backflow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Vertical Ventilation kit 3"

This 3" single walled Z-Flex Vertical vent kit is for vertical installations only. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet as well as need a condensation drain. Also remember A max vent run of 20 FT. subtracting 4 Ft. for every 90 Degree elbow in the run.