he only floor-vented, four season, tankless water heater for RVs, Trailers, Tiny Houses, Cabins, Park Models and more.
Endless hot water, on-demand
Designed specifically for RVs, Trailers, Tiny Houses, Cabins, and more
Conveniently vents through the floor without any sidewall penetration
Takes up half the space and weighs one third as much as a ten-gallon tank
No pilot light and very high efficiency
Reliable, proven VariFlame technology control system
Hot Water for Your Home in Any Season
The PrecisionTemp RV-550 NSP EC tankless water heater utilizes our patented VariFlame Control technology to deliver an endless flow of hot water for the ultimate in pampering for you and your family.
No more waiting for a small water tank to refill and no more quick, cold showers. Whether you’re just one person or a whole family, endless hot water is there for your enjoyment.
No Sidewall Penetration
The RV-550 NSP EC is vented through the floor and out of the home with a 2” exhaust pipe. No sidewall penetration (NSP EC) means you don’t have to cut a large opening in the wall.
Ultimate Floor Plan Flexibility
With a smaller footprint and floor venting, the RV-550 NSP EC allows for floor plan flexibility as never before. This can free up cabinet space and provide for less complicated installation.
The Proof is in the POWER
With 55,000 BTUs—the highest hot water output in the industry—and built-in freeze protection, the RV-550 NSP EC delivers on-demand, continuous hot water.
The heater operates only when the hot water outlet is turned on. The VariFlame control system then keeps the water temperature constant, regardless of the flow rate or incoming water temperature.
More Hot Water. Less Propane.
With higher efficiency and 55,000 BTUs, the RV-550 NSP EC produces more hot water than traditional water heaters.
Without a tank to keep hot, many people report that they use up to 50% less propane. Homeowners love the lower operating costs and fewer fill-ups.
Tankless propane-fired water heater with full gas modulation. Vented through the floor with cold weather protection.
Dimensions:13.5″ wide x 13.5″ deep x 14.25″ high
Capacity:55,000 BTUs max input (88°F temperature rise / gal / minute) 16,000 BTUs min input (26°F temperature rise / gal / minute)
Venting:Through the floor by 2″ exhaust pipe, power vented.
Construction:Galvanized case. Head exchanger: Solid copper. Gas train: Stainless flame strips with aluminized steel bodies.
Controls:Gas modulation valve assembly initiates spark ignition and varies gas input based on water flow rate, controlling water outlet temperature.
Safety Features:Pilotless ignition, completely dormant until water flow is initiated. ECO high temperature limit switch. Instant flame-proofing by flame rectification. Pressure relief valve. Certified to ANSI Z21.10.3 / CSA 4.3 Standards.
Disclaimer: Due to continuous product improvement,
PrecisionTemp reserves the right to change specifications at any time.
AffordableMiniSplits.com is an AUTHORIZED PrecisionTemp Dealer.